1 - Here is a list of items that you will need to successfully install your graphic:  Scissors, retractable razor blade or x-acto knife, tape measure, masking tape, squeegee (included), spray bottle filled with lukewarm water and 1 drop of liquid dishsoap, a friend to help you.  A hairdryer/heatgun is optional.  Before installing the graphic wash and dry the entire car thoroughly.

2 - Tape the graphic to your vehicle to get an idea where you want it.   Use small pieces of masking tape around the perimeter.  Trim around the graphic with the scissors if needed.

3 - Once the graphic is positioned correctly stick 2 long pieces of Masking tape down the CENTER of the Graphic vertically.  Make sure the tape is stuck on firmly. This is done so you can install one half of the graphic at a time.

4 - We will be installing the front portion of the graphic first.  Separate the transfer sheet w/ graphic away from the wax paper backing.

5 - Peel the graphic back to your masking taped centerpoint.

6 - Have your friend hold the graphic while you cut the Wax paper backing off carefully.  Be careful not to  crease the graphic.  Cut Carefully so you don’t scratch the car.