7 - Spray the car and the graphic with your water solution.  The graphic can be sprayed lightly and the car should be sprayed thoroughly.

8 - Have a friend hold the graphic in position without touching the car.  The graphic should be held  approx. 1 inch away from the car.  Start to squeegee graphic from the center of the graphic working your way out to force the water out of the top and bottom of the graphic.  First use light strokes, and then use harder ones to remove the water.  Take your time and do a good job so the graphic adheres correctly.

9 - Transfer the center vertical tape to the side that you've just done.

10 - Separate the rear portion of the graphic away from the wax paper backing.

11 - Have  your friend hold the graphic into place.

12 - Spray the car and the graphic with your water solution.  The graphic can be sprayed lightly and the car should be sprayed thoroughly.